HDPE Pile Sleeves SuperSleeve™
Our factory has perfected the way to make our SuperSleeve™ HDPE Pile Sleeves LC200 (.200″thick) to fit any size steel pile 12.75″OD & over and any size fiberglass pile 12″OD & over and any size concrete Square pile 12″x12″ & over.
This provides a product we were unable to offer before July of 2024 – we could only use our LC120 (.120″ thick) in the past to make pile sleeves for piles 12″OD & 14″OD and LC187 (.187″ thick) for piles 16”OD.
Our LC120, LC187, and LC200 High Density Polyethylene (HDPE) Pile Sleeves SuperSleeve™ are compatible with almost any size round or square piling (steel, fiberglass, wood, vinyl, concrete). They are made from virgin high density polyethylene and are pre-fabricated in our factory in Houston, TX. These pile sleeves are made ready to slide down the pile and can be turned to get better surface area over time or flipped from bottom to top.
The LC120, LC187, and LC200 HDPE Pile Sleeves SuperSleeve™ come with “fuse welded” PE flat or cone top caps attached at our factory, thus eliminating attachment hardware which will rust over time. Together, the sleeves and caps act as a uniform system that doesn’t require additional sleeve attachment to the pilings.
LC120 HDPE PILE SLEEVE SuperSleeve™
LC120 High Density Polyethylene (HDPE) Pile Sleeves SuperSleeve™ are 0.120” thick and made to fit almost any consistent size OD pile (steel, fiberglass, wood, vinyl, concrete) with approximately +1/16” clearance (unless you require more clearance). Lead time is approximately 2-4 weeks.
Density: 0.946 g/cm3
Weight: 0.55 #/sqft
LC187 HDPE PILE SLEEVE SuperSleeve™
LC187 High Density Polyethylene (HDPE) Pile Sleeves SuperSleeve™ are 0.187” thick and made to fit almost any consistent size OD pile (steel, fiberglass, wood, vinyl, concrete) with approximately +1/16” clearance (unless you require more clearance). Lead time is approximately 2-4 weeks.
Density: 0.946 g/cm3
Weight: 1.00 #/sqft
LC200 HDPE PILE SLEEVE SuperSleeve™
Our factory has perfected the manufacturing process for SuperSleeve™ LC200 High Density Polyethylene (HDPE) Pile Sleeves, achieving a thickness of 0.200″. These sleeves are designed to fit almost any consistent size OD pile—whether steel, fiberglass, wood, vinyl, or concrete—with approximately +1/16” clearance, unless more clearance is required.
As of July 2024, we are now able to offer the LC200 SuperSleeve™ for larger pile sizes that were previously out of reach. The LC200 can accommodate steel piles with an outer diameter (OD) of 12.75″ and over, fiberglass piles with an OD of 12″ and over, and square concrete piles measuring 12″x12″ and over.
Prior to this breakthrough, we could only provide our LC120 (0.120″ thick) for piles with 12″ and 14″ OD, and our LC187 (0.187″ thick) for piles with 16″ OD.
Lead times for these sleeves are approximately 2-4 weeks.
Density: 0.946 g/cm3
Weight: 1.25 #/sqft
