"Committed to Protecting Your Investment on Land and Sea"

Seawall Fiberglass
Bulkhead Construction
ShibataFenderTeam™ Marine Fenders docksaver™
Dock Bumpers
Request
More Information
SuperPile
Fiberglass Composite
Marine Pilings
SuperHanger™
PVC & Fiberglass Pipe Hangers
Send
Email

SuperPile Fiberglass Composite
Marine Pilings

SuperPile Specifications

  • One piece pilings available up to 100+ foot length and in multiple size diameters.

  • HDPE (High Density Polyethylene) outer sleeve available on entire or partial pile for extra abrasion and impact protection.

  • Custom sizing available upon request.

  • Can be custom engineered to the requirements of a specific project.

  • SuperPiles are manufactured, shipped and driven hollow with or without
    a driving tip. Driving tips and caps available upon request.

  • Depending on the final application, customer or factory may fill the piling with an
    appropriate core material.

  • Standard color is grey or black. Other color options available.

Advantages of Composite Pilings

  • Light weight
  • High strength-to-weight ratio
  • Directional strength
  • Corrosion & weather resistance
  • Dimensional stability
  • Low thermal conductivity
  • Low coefficient of thermal expansion
  • Non-magnetic
  • High impact strength
  • Low maintenance
  • Long term durability
  • Tailored surface finish
  • SuperPiles are all composite pilings fabricated of engineered fiberglass reinforcements and high-performance polyurethane resin.
  • SuperPiles are manufactured using a proprietary pultrusion process which ensure uniformity and high-strength.
  • The outer surface of the piling consists of a thermoplastic barrier which provides additional protection against ultraviolet (UV) light and abrasion.

SuperPiles are designed to resist tensile, compressive, shear and compressive, shear and torsional stresses. Use of appropriate core materials can be used to increase compressive loads and to enhance the bending performance.

Driving and Installation

SuperPiles are driven using industry standard driving equipment including diesel, vibratory and drop-end hammers can be used to install the composite piling. The piling can be driven either open ended or with a variety of driving shoes. A standard pipe pile driving helmet can be supplied upon request. The piles are easily cut, drilled and attached using ordinary tools found at most job sites.

SuperPiles are designed to carry both bearing and lateral loads while providing significant impact absorbing capacity.

SuperPiles have the compliance of timber, the strength of steel and the durability of plastic without being affected by electrolysis, temperature, marine rot or rust.


SuperPile Specifications

The five profiles are pultruded fiberglass composite with a hybridized polyurethane resin system with an E-glass reinforcement package.  The resin contains superior UV inhibitors, in addition, the piles are shrouded with a polyester surfacing veil that provides 10 mils of superior UV protection against the sun's harmful rays.  The extremely durable, light weight, high strength piles are the strongest, most cost-effective pultuded fiberglass piles in the marketplace.

SuperPile Fiberglass Pultruded Octagonal Pilings
10" dia x unlimited lengths

SuperPile Fiberglass Pultruded Octagonal Pilings
8" dia x unlimited lengths

Technical Information

Technical Information on SuperPile's SUPURTUF™ Polyurethane Pultrusion process is available here.  This PDF document will explain things like:

  • Why SUPUR-TUF PolyUrethane (PUR) Pultrusions?
  • Features and Benefits of SUPUR-TUF PolyUrethane (PUR) Pultrusions
  • Why PUR Resin?
  • Why are PUR Composites Better?
  • Benefits of SUPUR-TUF
  • SUPUR-TUF Physical Properties
  • Full Section Mechanical Performance
  • Fabrication Performance
  • Fire Performance
  • Environmental Properties

Click here to see why composite profiles designed with SUPUR-TUF deliver superior performance and can be supplied at equal or marginally higher cost than polyester.  A strength optimized cost effective solution can be reached that enables the end user to realize superior performance with total satisfaction.



About Lee Composites, Inc.
Seawall Construction & Bulkhead Construction
Seawall Accessories
SuperPile Fiberglass Composite Marine Pilings
ShibataFenderTeam™ Marine Fenders
docksaver™ Marine Dock Bumpers
SuperHanger™ Pipe Hanger Systems
Request More InformationSend EmailHome

Lee Composites, Inc.
(281) 376-6146
FAX (281) 251-8461 • P. O. Box 11286 , Spring, TX 77391-1286
boblee@leecomposites.com
Copyright © 2016 Lee Composites, Inc.
All Rights Reserved


All products are
MADE IN USA